62mm All Geared Double Column Radial Drilling Machine (Model: Maan 60×16/1500)
- Main Spindle is made of “EN8” material and hardness
- MT-bore internally grinded
- Accuracy and run out of 0.01 to 0.04 in main spindle shaft
- Pinion Shaft is made of “EN8” material and hardness
- Provided 4-8 speeds by accurate balancing
- Spindle sleeve-grinded
- Work light[As per requirement]
- Full size work table with accurate right-angled.[390X300][Surface Grinding is available as per your required]
- Tapper Roller facility for better sliding of drill head an arm guide
- Coolant system [As per requirement]
- Speeds can easily change
- Nitride Hardened “Ram”
- All gears are made of alloy steel[Gear Material] and Heat treatment [45 to 55 HRC] hardened & Lapped running in oil bath fitted
- Ram is accurately grinded and Honing process is done in the bore body containing ‘Ram’
- All Electrical parts are good quality.[Company:L&T]
- All the gears assemble in the machine are perfectly sized according to requirement All Bearing [NSK [Japan]/NBC/FLT Bearing]
- Column Design is heavy thickness and grinded as per the sizes required [column size:170mm]
- Specially spring type balanced spindle travel
- Manual And Fine feed system options
- Drilling last capacity : 40mm
- Heavy Duty structures
- Strongly ribbed and thick walled base plate having built-in coolant tank
- Generously Proportional & Well adequately ribbed base plates and column & arm for maximum rigidity and minimum deflection
- This machine may be capable of drilling & milling & tapping & honing & counter-boring & spot facing & Reaming & boring and other similar utilities.Arm guide surface are precision scraping process
- Arm length is long [950mm]
- Wooden case available on demanda
Specification in MM:
| Sr No. | Model No. | MAAN 60 x 16/1500 | |
| A | Capacity | 60 mm | |
| B | Drilling Capacity In Solid | ||
| 1 | IN CAST IRON HAVING 180BHN | 70mm | |
| 2 | IN MILD STEEL HAVING 200Mpa TENSILE STRENGTH | 62mm | |
| 3 | IN STEEL HAVING 600Mpa TENSILE STRENGTH | 60mm | |
| C | Tapping Capacity | 50mm | |
| D | Drilling Head | ||
| 1 | TAPER IN SPINDLE [MORSE TAPPER] | MT – 5 | |
| 2 | SPINDLE TRAVELS – AUTO/MANUAL | 325mm | |
| 3 | NO. OF SPINDLE SPEEDS / RANGE | 16/40 – 2000 RPM | |
| 4 | NO. OF AUTO FEEDS | 4/0.10 – 0.25 | |
| E | Electrical | ||
| 1 | Power Supply | 415v,3ph,50hz | |
| 2 | DRILLING HEAD MOTOR | 5hp | |
| 3 | ARM ELEVATING MOTOR | 2hp | |
| F | Working Range | ||
| 1 | DRILLING RADIUS [MIN. / MAX.] | 500 / 1470mm | |
| 2 | DISTANCE BETWEEN BASE PLATES TO SPINDLE MIN/MAX. [SPINDLE RETRACTED] | 555/1240mm | |
| 3 | DRILLING HEAD TRAVERSE MAX [MANUAL] | 1000mm | |
| 4 | VERTICAL TRAVERSE OF ARM [AUTO] | 740mm | |
| 5 | ROTATION OF ARM [BOTH SIDE] | 0-180DEG. | |
| G | Base Plate | ||
| 1 | WORKING SURFACE [L x W] | 1400 x 970mm | |
| 2 | NO. OF T – SLOTS & NOMINAL SIZE | Apr-22 | |
| 3 | WEIGHT OF MACHINE WITH ELELECTRICALS & STANDARD ACCESSORIES [APPROX] NET / CROSS] | 3600/4100Kg | |
| H | BOX TABLE SIZE [L x W x H] MM | 600 x 500 x 500 | |
| I | WOODEN PACKING DIMENSION [L x W x H] | 2300 x 1000 x 2450 | |
- Box Table
- Table stand for drilling cum milling machine
- Coolant Pump with Fitting
- Machine Lamp
- Drill Chuck with key & arbor
- Drill Sleeve
- Drill vice
- Special T-Bolts
- Foundation Bolt
- Service Tool
- Wooden Box Packing & Forwarding